Offset / PIP Magnetic RJ45 Connector Tab Up -40 To 85 ℃ Operating Temp
GLGNET JRWU1S402W is Magnetic RJ45 connector, Single Port, with Integarted 10 / 100 Base T Transformer, meet IEEE 802.3u Standards.
This RJ45 Modular Jack is with 0.2mm thickness brass Shielding Shell, without Integrated LED and EMI Finger Spring;
It supports Though Hole, or Offset or PIP mount Type, Tatch Up, Working Temperature is -40 t0 85 ℃；
This Magnetic RJ45 connector can be used for Network Servers, Routers, Set - TV Box, PCs , PCBs and some other converter adapters;
GLGNET supply many kinds of standard Magnetic RJ45 Connector, also support customization as required, our customization service as following:
Customization Services
- 90 ° or 180 ° Orientation
- Single Port or Multiple Port, Ganged Structure or Stacked Structure;
- With or without POE function;
- Supports to custom different structure, Tab - up or Tab - Down, Different size, Different Color, With or without Transformer;
- Supports to custom different Pin Length;
- LED color can be green, yellow, orange, red and so on;
- Operating Temp. Can be 0 ~ 70 ℃ or -40 ~ 85 ℃ ;
- Contact Finish can be with 6u", 15u", 30u", 50u" gold plating;
- Being with or without LED diode,
- Being with or without EMT TAB ( EMI Spring , EMI Finger );
- Being with or without lightpipes;
- Printing LOGO
- The integrated Transformer Supports 10 / 100 / 1000 / 2.5G / 5G even 10G Transmission Speed
The Magnetic RJ45 connector Length is 24.5 mm ( 0.965 inch), width is 16.5 mm ( 0.650 inch ) , height is 11.45 mm, the Soldering Pin Length is 2.54mm.
Tab Up Structure, Contact Finish with with 6 u" Gold Plating;
Features
- Broad set of configurations
- Compatible with Through hole / Offset / PIP Mount Type
- -40°C to +85°C or 0°C to +70°C operating temperature range
- Complies with requirements of IEEE 802.3u or IEEE 802.3ab standards
- RJ45 connector with 10 / 100 BASE-TX magnetic
- Design for 10 / 100 BASE transmission over UTP-5 cable
- Comply with RoHS requirements
Electrical Specification:
| Parameter | Specification |
| Brand | GLGNET |
| Operating Temperature | -40 to 85 ℃ |
| Storage Temperature | -40 to 85 ℃ |
| Turns Ratio | 1:1±3% |
| Open Circuit Inductance (ocl) | 350uH MIN@ 100KHz/100mV with 8mA DC Bias |
| Insertion Loss (IL) | -1.0dB MAX @ 0.3MHz – 100MHZ; |
| Return Loss (RL) Z out = 100 OHM | -18dB MIN @ 1MHz – 30MHZ; -13dB MIN @ 30MHz – 60MHZ; -10dB MIN @ 60MHz – 100MHZ; |
| Crosstalk Adjacent Channels | -30dB MIN @ 1MHz – 100MHZ |
| Common Mode Rejection Ratio (CMRR) | -30dB MIN @ 1 MHz – 100MHZ |
| HI - POT | 2250 VDC @ 60 Seconds |
Materials
- Housing: Class Filled LCP UL94V-0 (ROHS)
- Shielding : 0.2mm thickness, Finish 30 u" Min Nickel Overall
- Terminal parts : Underplat 50 u" Min NICKEL Overall, Contact Phospher Bronze, 0.35mm thickness; Finish Contact Area 6 u" Gold Plating
- Jack Cavity Conforms to FCC rules and regulations part 68 subpart F
- The Part is recommended for wave soldering process peak soldering temperature is 260 ℃ MAX. 10 Seconds Max;
- Operating Temperature: -40 to 85 ℃, Storage Temperature : -40 to 85 ℃
Magnetic RJ45 Connector ( JRWU1S402W ) Attributes:
| Brand | GLGNET |
| Part Number | JRWU1S402W |
| Application-Lan | ETHERNET without POE |
| AutomDX | YES |
| Bst Circuit | YES |
| Configuration RX | T,C |
| Configuration TX | T,C |
| Contact Mating Area Plating | GOLD 6u"/15u"/30u"/ 50u" |
| Diodes | NO DIODES |
| LED Option | With or without |
| Shielding | Shielded, EMI Finger |
| Mounting Type | Through Hole / Offset / PIP |
| Orientation | 90° Angle (Right) |
| Latch | Latch Up |
| Number of Ports | 1 X 1 |
| PCB | FR4 |
| PCB Mount Angle | SIDE ENTRY |
| PCB Retaining Post | T POST |
| Package Height (Inches) | 0.451 inch |
| Package Height (mm) | 11.45 |
| Package Length (Inches) | 0.965 inch |
| Package Length (mm) | 24.5 mm |
| Package Width (Inches) | 0.650 inch |
| Package Width (mm) | 16.5 mm |
| Pin Type | THT SOLDER |
| RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
| Search | YES |
| Shield EMI Tabs | With or Without |
| Speed | 10 / 100 BASE-T |
| Temperature | -40 TO 85 ℃ |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
Applications:
Networking equipment
- Hubs
- Switches
- Routers
- PCs
- Servers
- Workstations
- Motherboards
Equipment utilizing a network port
- NICs
- Servers
- PCs
- Consumer Devices
GLGNET Advantage
- We have our Own Hardware Mold and Plastic Mold
- Has 3 LS-WEDM Machines
- Has 12 WEDM Machines and 8 CNC Machines
- Has 20 Grinding Machines and 12 Electrical Discharge Machines
- Has 30 Stamping Machines
- Has 55 Plastic Injection Machines
- Has Automatic Assembly Workshops
- Fast Response, Professional R&D Engineers, Positive Service Team, Ensure all process effective and well-organized;
- 20 years experiences in Variety Connectors
- 1500 Employees
- 58 R&D Engineers.
- 22000 square meters Factory
- 20kk ports / month Capacity
- We support Costom Service;
- Our products are compliant with RoHS, REACH and UL certification
- Long term Corporation with HUAWEI, ZTE, FOXCONN, XIAOMI, TCL and so on
- 20KK Prots / Month Capacity
Drawing
You can Know more details from Folllwing Drawing;
Product Tags:
|
|
Offset / PIP Rj45 Multiple Port Connectors Tab Up -40 To 85 ℃ Operating Temp Images
|
